SIEMENS AC DRIVE PM240 110KW 400VOLT

Product Description

Siemens SINAMICS PM240 Power Module for 90kW (125HP) 400V Three Phase Motor to 178A at High Overload or 110kW (150HP) to 205A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.

Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.

Size F - 350mm Wide x 316mm Deep x 635mm High (excluding Control Unit). IP20
Weight: 39kg

90kW, 178A: 136% x 57 seconds every 5 minutes. 160% for 3 seconds every 5 minutes. High Overload.
110kW, 205A: 10% x 59 seconds every 5 minutes. 150% for 1 second every 5 minutes. (Fan/Pump Rated / Variable Torque)
Braking(DBr): to 5.5 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.

Input Voltage: Three Phase 380V-480V  10% at 50-60Hz 5%
Input Current: 205A at High Overload, 234A when Fan/Pump rated.
EMC Filters: None (Unfiltered - external option)